Specs/FAQs

I’ve had a few folks interested in buying my house and they had great questions.  Here are all the specs and details of the house I can think of:

  • Trailer: Leonard brand, GVWR @ 10,000 pounds, dual axle, brakes, bought new
  • Subfloor: Plytanium DryPly (SFI certified)
  • Lumber: 2x4s, 2x6s (SFI certified)
  • Insulation: R-15 foam board in the floor; R-13 EcoTouch in the walls (recycled content)
  • Caulking: GreenGuard low-VOC
  • Exterior siding, trim, soffits: SmartSide
  • Windows: Loft = Plygem (made here in VA!); the rest = Jeld-Wen (all low-E, vinyl, new)
  • Roof: 3/4″ plywood panels, Energy Star metal roof
  • Flooring: reclaimed wood
  • Interior walls: luan (luaun?), sealed with a pickling stain
  • Interior window trim: reclaimed wood
  • Shower: 32×32 stall shower
  • Toilet: simple composting type, but we plumbed for a flushing toilet too
  • Kitchen sink: stainless steel, used
  • Kitchen cabinets: KraftMaid, used, looks like a cherry finish
  • Countertops: laminate, from Habitat ReStore but new
  • Refrigerator: propane and/or electric, Norcold, beige and black
  • Stove/oven: 3 burner, propane, small oven, black
  • Heater: Newport P9000 propane marine heater
  • Water heater: propane, on demand
  • Water: 35 gallon storage tank or you can use RV hookups & a hose, electric water pump
  • Electricity: RV hookups or solar
  • Solar: 250 watt panel, two 35 amp batteries, inverter, charge controller
  • Storage: shelves from reclaimed wood, two closets, storage loft, drawers in the couch, space under the stairs
  • Sleeping: loft fits queen sized mattress, floor is covered in carpet tiles (recycled content)
  • Seating: large “couch” base with storage, desk area, empty floor space for a chair in the corner

And for some common questions I’ve been getting:

Q – How is a tiny house a better option than a camper?

A – Tiny houses are usually built to “normal” house standards, meaning with lumber and house-worthy materials.  A tiny house should last you much longer than a camper and is also likely better insulated.  Additionally, you can customize a tiny house easier than you can alter a camper.  These houses also feel more like a home…that’s really a subjective thing, but important for some people.

Q – How is your tiny house sustainable?  Wouldn’t it be more eco-friendly to buy a used camper?

A – This house chose to balance the three main elements of sustainability (the environment, the economy, and society).  It is not 100% eco-friendly!  If I went for all environmental, I would be broke.  If I went for all economic, it would be unhealthy for me and the environment to build.  If I just focused on society, then I’d be giving away this house for free.  I happen to lean more towards environmental sustainability, but sometimes it’s just not possible based on time and money.  As for the specifics of this house, electricity is run from solar, the toilet uses zero water, the fixtures in the kitchen and shower are low flow, I used tons of reclaimed wood, the insulation is recycled, the roof is Energy Star rated, the siding and lumber comes from sustainably-managed forests, and many of the materials came from thrift stores or Habitat ReStore.  As for the used camper idea, it depends.  Buying used means no demand for new material, but I’d probably have to replace that used camper with another one a few years down the road, and then another, and then another.  Also, a used camper would not have been built with environmentally-friendly practices or materials.

Q – How much are you selling your house for?

A – I’ll have to update this once I do sell it, but for now all I can say is that I’m not sure.  Tiny houses range in price from around $12k to upwards of $50k.  I’ve seen a lot of people say that asking more than $20k for one is greedy, but then they’ve probably never had to build one of these.  If you’re considering buying this one (or any tiny house), make sure you’re paying attention to the quality of materials and craftsmanship.  My dad and I built this with care and expertise…he was a general contractor for 30ish years, then a home inspector, and now owns a hardware store.  He’s a stickler for quality!  His name is on this thing, so it’s been built right.  We used 2x4s instead of 2x3s, the best plywood subfloor you can get, splurged on the roof and insulation, and the appliances are pricey because they are for RVs.  Plus, I’m including a solar panel and associated gadgets.  If you’re looking for a cheap tiny house, this one is not for you. 
About these ads

3 thoughts on “Specs/FAQs

  1. Hi. I’m thinking about siding the outside of my garage with pallet wood. Just wonder if its a good idea. Should I be concerned with warping or termites? And if you have any tips would be great. Thanks
    Ryan Rogus
    Icandoit33@gmail.com

  2. Hello!

    I have a question regarding your pallet wood flooring. The Madison OM build (a branch of Madison’s occupy building tiny houses for/with the homeless community) used pallets for siding (as did Macy Miller). The OM build folks mentioned trying to use pallets for flooring, but that because of varying thicknesses it didn’t work out. How did you process your pallet wood and did you find the same problem?

    Hope you are having a cozy winter :-)

    Cheers,
    Hannah

    • Hannah,

      Yes that was a major pain in the butt! Here’s the overview of my process after I selected the right pieces:
      1. Cut the nail holes off the ends and middle
      2. Sand all sides
      3. Select a thickness to plane all boards
      4. Sort boards based on current thickness (ones that need only a little planing, medium, and lots of planing). It makes it easier when adjusting the planer on each pass if each board is similar in thickness to the others.
      5. Pick a pile and start running them through the planer until they measure the right thickness
      6. Repeat on other piles
      7. Sand on fronts and to edges to make it more comfy on the feet (and then if there’s a little thickness difference left, at least there are no sharp edges to walk on. Makes it feel like tile this way.)

      The rest was the staining and install, which I’m sure you guys are good with!

      Let me know if I can help again.
      -Sarah

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s